Hydromat Double Sided Self-adhesive Butyl Internal Corner
A Hydromat internal corner, part of the Hydromat self-adhesive butyl tanking system for wet rooms as supplied with the complete Hydromat tanking 5 and 10m² kits.
Designed for use on the internal corner junction between the floor and walls. Use in conjunction with Hydromat Tanking Membrane and Jointing Tape to create a permanently flexible and waterproof junction.
Once installed it can be tiled over immediately, drastically speeding up the speed of installation.
Key benefits:
- Preformed self-adhesive butyl internal corner
- Double sided to allow for lapping of the tanking membrane and jointing tape
- 120 x 120mm
- Can be tiled over immediately
- Suitable for use with underfloor heating
Installation guidance:
- Check the substrate is sound, free of contaminants and remove any loose material
- Make sure there are no significant irregularities, any gaps should be filled
- Surfaces should be primed (order separately) and allowed to dry
- Roller over all areas for maximum adhesion, before removing the top film
- Seal all edges and junctions with Butyl sealant (order separately)
- Download the PDF installation instructions, from the Installation and Help Guides "Tab" for more information
Also available, order separately:
- 5 and 10m² Hydromat Self-Adhesive Butyl Tanking Membrane rolls
- 10m x 150mm Hydromat Double Sided Self-adhesive Butyl Joint Tape
- Hydromat Double Sided Self-adhesive Butyl External Corners
- 1 Litre primer
- 310ml tube of Butyl Sealant
Warranty:
- When installed correctly by a competent person and used for normal Wetroom applications this tanking system has a life-of-tiling guarantee with the manufacturer (if grout lines are maintained)
- No guarantee is offered where this is not the case
Manufacturer | Hydromat |
---|
Stock status | In stock |
---|---|
Delivery time | Next working day if ordered by 2pm |
Returns Status | Returnable in 14 days |