AKW Mullen Surface or Level Access, Cut-to-Length 1800x700mm Alcove SHWR Tray - Choice Waste
The AKW Mullen alcove cut-to-length shower tray can be trimmed by up to 275mm from each end and is supplied with specially designed stop ends to give a strong mechanical waterproof joint allowing you to trim the tray on site for the perfect fit making the tray ideal for bath replacements.
The shower tray is 27mm thick tray, range of sizes and handing. The rear central 90mm waste hole allows quick and easy installation to avoid joists. Choice of GW90 Gravity or the PW90 Pumped wastes with either 15 or 22mm outlets.
Suitable for timber and screed floors, can be surface mounted or recessed for level access. The trays slip resistant textured surface decreases the risks of accidents when using the shower.
Vinyl safety flooring can be clamped to the side of the tray for a leak free joint. Non-slip floor tiles can be used which also requires the Floor Tiling Adaptor kit (Product code: 26259).
The tray is compatible with AKW Standard, Sliding, Glass and Silverdale shower screens, check the image gallery for the compatibility chart.
Key benefits:
- Alcove shower tray for level access where the client needs a defined showering area
- Unique vinyl safety flooring integrated clamping strip allows for quick and watertight installations
- Flooring can be fitted after the tray and screen have been installed avoiding unnecessary site visits
- Built in tiling upstands on 3 sides complete the all-round integrity of the water seals
- Suitable for point loading from seats
- Weight limited 190kg / 30 stone
- No under tray foaming is needed
- Ribbed underside eliminating slippage or float during installation
- Watertight seals with the Intergrip® strip for joining vinyl sheet flooring to the tray edge
- Quick draining, with a 25mm fall inside the tray
- Unrivalled strength and stability, using compressed GRP
- Pre-formed fixing holes ensure quick and easy installation
- Slip resistant textured surface
- Floor tiling, wallboard adaptor, and pipe duct kits are available separately to aid any installation
Waste options:
- - Flow rate: approx. 31 litres per minute
- - Installation depth required below tray (mm): 90
- - Flow rate: approx. 31 litres per minute
- - Installation depth required below tray (mm): 60
- - Flow rate: approx. 14 litres per minute
- - Installation depth required below tray (mm): 60
- - Non return valve ensures the trap always retains water
- - Flow rate: 27 l/min with 15mm head and 1m of pipe
- - Installation depth required below tray (mm): 48
- - Outlet pipe (mm): 15 / 22
- - Installation depth required below tray (mm): 36
- 27mm tray height
- 1800mm width tray that can be trimmed by up to 275mm off both ends, supplied with a cut-to-length kit
- 700 tray depth + 50mm flange
- Screed floors require a 27mm recess for level access
- Can be surface mounted on screed floors, ramps are available for installation above or below vinyl flooring
- Timber floors require plywood (not included) to increase the floor up to the tray height, for complete level access
- Central 90mm waste outlet hole
- Choice of gravity or pumped wastes
- Unrivalled strength and stability, manufactured from compressed GRP
- Lifetime manufacturer warranty
- Tray only code: 26108 (Non-handed)
- Tray with Gravity Waste code: 26112 (Non-handed)
AKW: 25120 - GW90 90mm Dia. Gravity Waste (50mm Water Trap)
AKW: 25434 - GW90 Metal Topped 90mm Dia. Waste
AKW: 25404 - Low Depth GW90 Waste (50mm Water Trap)
AKW: 25492-UK - DW90 Low Depth Dry Shower Waste
AKW: 25105 / 25406 - PW90 Pumped Waste
Technical details:
Warranty:
Manufacturer product codes:
Manufacturer | AKW / Contour |
---|---|
Model | AKW - Mullen |
Cut to Length Range (mm) | 1250-1800 |
Tray Size (mm) | 1800x700 - Up to 275 can be cut off (both sides) |
Handing | Unhanded |
Entry Configuration | Front Entry (Alcove) |
Step-in Height (mm) | Level Access - 0, Low Level Step-in - 27 |
Thickness of Tray (mm) | 27 |
Waste Compatibility | Gravity Waste, Pumped Waste |
Tray Edge for Floor Finish | Yes - Vinyl or Tiles |
Ramp or Step Available | Ramp |
Stock status | In stock |
---|---|
Delivery time | Next working day if ordered by 1.30pm |
Returns Status | Returnable in 14 days |